Sample Holders & Accessories

These products enable to take electrochemical measurement by only 200 µL of the analyte with voltammetry cells. A IPPG (Ion Permeability Porous Glass) tip is attached to the end of its glass tube, and ions transmit freely.

The sample holder is a multi-purpose accessory.

  • 6 mm diameter can be used for RE-7 series reference electrode
  • 9 mm diameter can be used in SVC-2 voltammetry cell (MCA and SVC-3C mode)
  • The salt bridge can be used as reference electrode to prevent contamination
Catalog No. Description SIZE
012177 Sample holder dia 9.0 mm (2 pcs) OD: 9 mm, ID: 7 mm, L: 68 mm
012307 Sample holder dia 9.0 mm (22 pcs) OD: 9 mm, ID: 7 mm, L: 68 mm
012176 Sample holder dia 6.0 mm (2 pcs) OD: 6 mm, ID: 4 mm, L: 68 mm
012306 Sample holder dia 6.0 mm (22 pcs) OD: 6 mm, ID: 4 mm, L: 68 mm

Repair kit for Sample holder & Accessories

IPPG (Ion Permeability Porous Glass) is porous glass with 40-200 Å diameter of pores. Chemically stable, operational
as high as 800 °C. Also can be cut with a sharp knife.

Catalog No. Description Quantity
012796 Repair kit for sample holder
Contents
Ion Permeability Porous Glass (IPPG), dia 3.2 x 4.0 mm 10 pcs
Heat shrink Teflon tubing, 150 mm 1
012183 Heat shrink Teflon tubing, 100 mm 1
012622 Vycor glass tube
(OD: 8 mm; ID: 5.5 mm; Length: 100 mm)
1
Reminder
Yellowish discoloration indicates the contamination. This is caused by absorbing of organics into their pores from the air.

Copyrights © 2016 All Rights Reserved